With proven performance, the Goulds 3196 ANSI Standard Dimension Process Centrifugal Pump has been an industry standard since 1961. These 3196 pumps are certified to NSF/ANSI 61 and feature i-FRAME® Intelligent Monitoring to extend MTBF (Mean Time Between Failure) and lower LCC (Life Cycle Cost).
Power ends, a key to chemical process pump reliability, must be designed for optimum bearing life, effective oil cooling, and minimum shaft deflection. Onboard condition monitoring provides early warning of potential failures. The i-FRAME power end design maximizes reliability and MTBF, with severe-duty bearings to increase bearing life 2-5 times. The onboard condition monitor gives visible indication of general pump health.
Capacity |
to 7000 GPM (1590 m 3 /h) |
Head |
to 730 feet (223 m) |
Temperature |
to 700° F (371° C) |
Pressure |
to 375 PSIG (26 bar) |
HT 3196 i-FRAME High-Temperature Process Pumps
LF 3196 i-FRAME Low Flow ANSI Process Pumps
CV 3196 i-FRAME Non-Clog Process Pumps
3796 i-FRAME Self-Priming Process Pumps
3996 In-Line Process Pumps